Commercial vehicle wrapping and graphics 

Van graphics and wraps are quickly becoming one of the most effective forms of advertising on the road. They help to promote businesses, both large and small 24/7 with eye catching unique designs individually designed and produced for our clients.
 
We brand thousands of vehicles every year ensuring consistency throughout so you can be assured you’re in good hands with us. From full vehicle wrapping to simple lettering, getting your fleet livery right can result in significant increases in brand awareness, and can lead to more business opportunities.
​
With our state of the art printing and finishing equipment we can control quality throughout, from initial design, into production and finally onto fitting giving our customers a guaranteed quality product.
​
 
We also supply and install Chapter 8 Chevron Kits 
​
We supply and install chapter 8 compliant kits in all of the approved conspicuity materials – Nikkalite Crystal Grade, 3M Diamond Grade, Avery T-Series and ORAFOL Oralite VC 612, as well as Engineering Grade reflective, fluorescent films and side marking tape.
All of our kits are specially designed and made to ensure proper fit and alignment on the vehicle or substrate.  
We can supply and install chapter 8 chevron kits for one vehicle or a national fleet across the UK giving a consistent high quality finish throughout.
​
​
There are two main types of chevron kits available.
- Engineering grade red is the lower cost option and generally accepted if the vehicle is working on roads that aren’t Motorways. It is a ‘flat’ reflective vinyl that is less reflective than the prismatic option but still offers great reflective properties.
​
- Prismatic grade (sometimes called Diamond grade) reflective red is the preferred material, due to its higher reflectivity values. It is required for all vehicles working on motorways.
​
Here is some information and guidance
- Any vehicle working on the highway should be a conspicuous colour, either White, Yellow or Silver that is now commonly accepted.
​
- Rear Chevron markings of alternative retro-reflective red material and non-reflective fluorescent yellow material, with the width of each strip being no less than 150mm. Each strip should be inclined 45° or 60° and pointing upwards. These chevron markings should cover as much of the rear of the vehicle as possible without obscuring windows, registration plates or vehicle lighting.
​
- If vehicles are carrying out maintenance on roads, then an additional sign is required reading ‘HIGHWAY MAINTENANCE’, if the work is strictly on motorways then ‘MOTORWAY MAINTENANCE’ is required. This text must be a minimum of 70mm high for temporary traffic management vehicles and 140mm for vehicles carrying personnel or equipment.
​
- A strip of yellow micro-prismatic grade reflective material, no smaller than 50mm wide must be fitted along the sides and covering the length of the vehicle.
​
- Red retro-reflective tape must be applied to the rear facing edge of all opening doors, equipment lockers and guard rails, we call these small stickers ‘Lozenges’ and fit a minimum of two to each appropriate edge.
​
​Get in touch with one of our expert team to find out more.